Catalytic Converters Secrets

How To Service And Replace Your Catalytic Converter

Catalytic converters are installed in cars to reduce the harmful emissions that come from cars. They can also become blocked and require replacement, and an expert can tell you the best way to replace them for you. In this post, you’ll discover how catalytic converters work, what they can do, when it’s time to service and replace them and how an expert will go about it for you!

What is what is a Catalytic Converter?

A catalytic converter is a device that is installed in the vehicle to convert exhaust pollutants in to substances that are less toxic. Catalytic converters are mandated by legislation in several countries, and they’ve been proven to be efficient at cutting emissions.

Why should I repair the Catalytic Converter?

Catalytic converters are a device that helps to reduce emissions from your vehicle. Over time, they can be damaged or blocked, which can lead to increased emission levels and lower performance. A replacement for your catalytic converter may help improve your car’s efficiency and reduce its environmental impact.

Where are they located on a vehicle?

Catalytic converters can be found in the exhaust system, behind the motor and the muffler.

What’s the procedure to follow to replace a catalytic converter?

If your catalytic converter has replacing, the procedure isn’t difficult, however it is imperative to follow the instructions with care. It will require a brand-new catalytic converteras well as a screwdriver, and a wrench.

1. Park your car on a level surface and place the parking brake.

2. Connect the negative battery cable to avoid any electrical shorts.

3. Find the catalytic converter under the car. It’s usually near the muffler.

4. The exhaust pipe must be disconnected from the converter catalytic. There will be two bolts holding it in place. Make use of the wrench to loosen them, and then take off the pipe.

5. Unscrew the bolts which hold the catalytic converter in place using the screwdriver. There are typically three of them.

6. The old converter must be removed and install the new one in its place. Make sure all the bolts are securely tightened.

7. Connect the exhaust pipe back to the mains as well as tighten the bolts that hold it in the correct position.

8. Connect the battery’s negative cable and begin your car to test it out

How to avoid the expense of hiring someone to replace your catalytic converter

If your vehicle is more than a few years old, there’s a good chance that the catalytic converter must be replaced. This can be an expensive fix, so it is essential to learn how to repair it yourself. The process of replacing a catalytic converter is not difficult, however it is time-consuming. Here are some tips to save you the expense of paying someone to replace your catalytic converter.

1. Diagnose the problem correctly. It is the first thing to make it clear that the catalytic converter has to be replaced and not just cleaned. A qualified mechanic will be able to identify the problem correctly. Learn more about how to recycle catalytic now.

2. Make sure you have the right tools and pieces. You’ll require a few tools to change the converter’s catalytic which includes the socket set, wrench set and a screwdriver set. You’ll also need a Catalytic converter that is new.

3. Remove the battery. Before you begin any work on your vehicle it is essential to unplug the battery. This will prevent any unintentional electrical shocks during your working.

4. Find where the catalytic convertor is. The catalytic converter will be located under the car, usually close to the exhaust pipes.

5. Eliminate the old catalytic converter.


While you might not need to replace your catalytic converter it’s a good idea to know the procedure to do it in the event that the time comes. We hope that this guide has given you an understanding of the definition of a catalytic convertor and how you can replace it if necessary. For any queries or questions you have, please reach for us, and we’ll be glad to assist.